5-40
Location Message Line Description
S 8.12
RECLOSE DISABLED
STATUS NO
This message indicates the status of the internal hardware relay which
enables or disables the reclosing scheme.
S 8.13
LCD DISPLAY
CONTRAST 5
This message allows the contrast of the display to be adjusted to suit the
user. The range of adjustment is 0-10.
S 8.14
58E271B.000
MAR 28,1994
This is the 565 Relay Firmware revision identifier.
S 8.15
SERVICE USE ONLY
CODE 0
This message is used by service personnel for calibration and service of
the 565 Relay. It is not intended for use by other than MULTILIN personnel.
S 8.16
CALIBRATION MODE
END OF PAGE
The last line of page 8, setpoints. Press the PAGE key to view page 9.
SETPOINTS MODE - CALIBRATION
To Next Page
Loading...
