Programming templates
FireShield Technical Reference Manual B.5
Zone settings - IDC 10
Event Where to report the event 4/2 event code
Alarm activation None CS 1 CS 2 CS 1 & 2 1A
Waterflow activation None CS 1 CS 2 CS 1 & 2 2A
Trouble activation None CS 1 CS 2 CS 1 & 2 7A
Supervisory activation None CS 1 CS 2 CS 1 & 2 3A
Monitor activation None CS 1 CS 2 CS 1 & 2 5A
Zone restoral (4/2 code) (0 – F) E
NAC settings - NAC 1
Event Where to report the event 4/2 event code
Trouble activation None CS 1 CS 2 CS 1 & 2 61
NAC settings - NAC 2
Event Where to report the event 4/2 event code
Trouble activation None CS 1 CS 2 CS 1 & 2 62
NAC settings - NAC 3
Event Where to report the event 4/2 Event code
Trouble activation None CS 1 CS 2 CS 1 & 2 63
NAC settings - NAC 4
Event Where to report the event 4/2 event code
Trouble activation None CS 1 CS 2 CS 1 & 2 64
NAC Trouble restoral (4/2 code) (0 – F) D
Other FSDACT options
Note: These options can only be changed using the FireShield Configuration Utility.
Swinger shutdown (0 – 255) 000
Contact ID codes
Code Description Code Description
Note: Default settings are shown in boldface type.
To Next Page
Loading...