3
Wall Mounting
For best reception, you will likely want to mount the
antenna above your television. Please follow the
instructions below for proper wall mounting.
1. Locate the mounting hardware
2. Locate the tools below (tools not included)
a. Some tools you will need are:
i. Tape measure
ii. Pencil or pen to mark your holes
iii. 1/8” drill bit and drill
iv. Hammer
v. Phillips screwdriver
3. Identify where you want to mount the antenna
4. Use your tape measure and a pencil, mark two
places on the wall exactly 7 inches apart (as
shown on the back of your antenna)
5. Use a 1/8" drill bit and carefully drill the two
holes marked in step 4.
Digital Indoor Antenna
Mounting
Hardware
UL-listed
Power
Adapter
Power Inserter
To Next Page
Loading...
