Need help?Do you have a question about the GE 20 kW Home and is the answer not in the manual?
Explains hazard symbols, DANGER, WARNING, CAUTION, and NOTICE signal words.
Outlines duties for homeowners and installing dealers/contractors.
Covers unpacking, delivery inspection, and shipment contents.
A step-by-step guide to ensure all installation tasks are completed.
General guidelines for generator location concerning safety.
Specific placement advice to minimize carbon monoxide hazards.
Directing exhaust away from structures and avoiding debris accumulation.
Placement requirements to minimize fire hazards, referencing NFPA 37.
Visual guide showing minimum installation distances for fire safety.
Additional rules for generator placement related to services and environment.
Details the National Fire Protection Association standards for generators.
Identifies specific points for electrical and fuel connections on the unit.
Instructions for safely lifting and anchoring the generator unit.
Identifies the various access panels and their contents.
Step-by-step guide to open and secure generator access panels.
Covers fuel system piping, safety, and applicable codes like NFPA 37.
Discusses fuel factors, pressure needs, power loss, and pipe sizing.
Step-by-step guide for converting the generator between NG and LP fuels.
Provides estimated fuel usage data for natural gas and LP vapor.
Identifies and describes various terminal blocks and connection points.
Details the generator's AC connection system and grounding requirements.
Explains connections to the transfer switch and communication wiring.
Overview of the generator's control board, buttons, and display.
Guide to navigating the control panel menu options for settings.
Instructions for setting date, time, and exercise cycle via the control panel.
Explains various status messages displayed on the control panel.
Details on accessing and configuring advanced generator settings.
Information on sensors that automatically shut down the generator.
Guidance on engine oil fill and proper battery installation.
Step-by-step instructions for the initial start-up of the generator.
Explains the electronic governor, its components, and checks.
Covers how the generator operates automatically based on utility power.
Instructions for scheduling automatic generator exercise cycles.
Steps for installing the antenna for the wireless monitor system.
Identifies monitor parts, LEDs, and their meanings.
Instructions for operating and linking the wireless monitor to the generator.
Interprets status messages and LED codes from the wireless monitor.
Final checks before placing the generator system into service.
Visual representation of the generator's system electrical layout.
Detailed diagram illustrating electrical wiring throughout the generator system.
To Next Page
General
