GE 24116 - 4 - Device Universal Remote - Code Identification Feature

9
Code Identification Feature
The Code Identification Feature allows you to identify
the four digit library code stored under your device
key. For example, if you want to find out what 4-digit
code is stored under your TV device key, follow the six
steps below:
1. Press and hold the SETUP button until the red
indicator stays on. Release the SETUP button.
2. Press and release the desired mode button (TV,
DVD, etc.). The red indicator blinks, then stays lit.
3. Press and release the SETUP button. The red
indicator blinks off.
4. To find the first digit for the code stored under the
mode key pressed in step 2, press each numeric
key from 0-9 in turn. When the red indicator blinks
off the number you pressed is the first digit for the
code you are searching for.
5. To find the second digit, repeat step 4, this time
when the red indicator blinks off this is the second
digit.
6. Repeat step 4 again to find the third and fourth
digits. This time the red indicator turns off and
stays off.