TAKE-OUT COUNTER
(on some
models)
The Take-out
Counter provides
an extra work
surface right at
the refrigerator.
Frequently used
items
stored on the
fresh
food door are
~
IEiF
-.
/—
\lll
II
II
-
11-4
.
F-==--II’LL
II
readily accessible without having
to
open the main
refrigerator door.
Although durable, stain- and scratch-resistant, the
work surface on the Take-out Counter should not be
used as a cutting board. Sharp utensils can damage it.
The Take-out Counter is also accessible through a
lift-
up door on the inside of the fresh food door.
Take-out Counter Porta-Bin
This Porta-Bin has
a
Inner -—.
_
___ -
special lip that overlaps
the Take-out Counter. It
is not interchangeable
with the other door
bins.
To
remove it, open
the Take-out Counter
door to free the lip.
Take-out Counter Porta-Bin
-
“
Raise
the inner door and lift
the bin straight up until the
hooks on the bin come out
of the tracks on the door.
When you replace it. make
sure the Take-out Counter
door is open so the lip is
positioned proper] y.
SHELVES
Porta-Bins on the Doors
Adjustable
Porta-
>%1
II I
! II
compartment doors
.-
Bi~s
on fresh food
and freezer
can
~asily
be carried
from the refrigerator
to the work area.
=
A
Ii
To remove: Lift Porta-Bin straight up until mounting
hooks
disengage.
-.
To relocate: Select desired shelf height, engage
Porta-Bin ’s hooks in slots on the tracks of the door,
and push in and down. Porta-Bin will hook in place.
Snuggers are designed
to give you storage
flexibility
in
Porta-Bins
and on your fresh food
door shelves. items
such
as
salad
dressings,
steak sauces
and
other
condiments can now be
kept securely
against
Take-out Counter Porta-Bin
the door liner to help
v.
prevent tipping, spilling or sliding.
Place index finger and middle finger on either side of
the snugger near the front and simply move it back
and forth to fit your needs.
Adjustable Shelves
Shelves in the fresh food
and freezer compartments
are adjustable, enabling
you to make efficient
shelf arrangements to fit
your family’s food
storage needs.
To remove shelves: Tilt
To replace shelves: Select
the desired shelf height. With
shelf front raised slightly,
engage top
lugs
in tracks at
rear of cabinet. Then lower
front of shelf until it locks
into position. Both wire
and tempered glass shelves
the shelf up at front, then lift it up and out of tracks on
are adjusted the same way.
the rear wall of the refrigerator.
8
❑
Ill!!lll
to lock
Y
II
II
F
into place
IN
I/’
—.
—.
To Next Page
Loading...
Need help?
General
