GE 25982 - Base Unit Speakerphone Operation; Receiving a Call with Speakerphone; Making a Call with Speakerphone

7

For best speakerphone performance, avoid the following:
• Areas with high background noise. (The microphone might pick up these sounds.)
• Surfaces affected by vibration.
• Recessed areas such as in a corner, under a cupboard, or next to a cabinet, which
can generate an echo effect.
Note the following guidelines when using the speakerphone.
• Stay reasonably close to the phone so that you can be clearly heard by the person
to whom you are speaking.
• The SPEAKER indicator is on when the speakerphone is in use.

1. When the phone rings, press and release the  button on the
base, and speak normally, at a minimum distance of 8-9 inches, into the built-in
microphone.
. Adjust speakerphone volume by pressing the  and  buttons on
the base.
3. To end the call, press the  button again.

1. Press and release the  button on the base, and wait for a dial
tone.
. Dial the number (using a memory dial number, if desired.) The number shows in
the display.
-Or-
Dial the number and then press the  button.
3. When the party answers, adjust speakerphone volume by pressing the 
 and  buttons.
4. To end the call, press the  button again.