GE 25982 - Connecting an Optional Headset to the Handset; Connecting the Belt Clip; Headset and Belt Clip Operation

39


For hands free conversation, connect the headset (optional) to the HEADSET jack. The
handset receiver and microphone are disabled when the headset is connected.
Adjust the headset to rest comfortably on top of your head and over your ear. Move
the microphone to approximately  to 3 inches from your mouth.
• Press the  button to answer or place a call before using the
headset.

There are two slots, one on each side of the handset.
• Attach the belt clip by inserting the sides of the belt clip into the slots. Snap the
ends of the belt clip into place.