GE 25982 - Accessing the Answering System from Another Location; Changing the Security Code

37
You should erase some of the messages in order for the system to record
incoming messages.





You can access your answering system from any touch-tone phone by entering your
3-digit security code after you hear the outgoing announcement.
1. Dial the phone number the answering system is connected to.
. After the answering system answers, enter the security code after you hear the tone.
3. Follow the voice menu to use the answering system’s remote functions.
The remote feature enables you to perform the following functions:
To Press this Button
Repeat message 1
Play back messages 
Stop message playback 
Erase message 0 (during message playback)
Skip message 3
Turn off/on answering system 4
Review voice menu options 7
The base shows REMOTE ACCESS ANSWERING CALL.





The default security code for accessing the answering system from another location
is 1  3.
The security code is set through the programming menu. Refer to Telephone Set Up
for more information.