GE 27957 - Chain Dialing from Memory

28
1. Make sure the phone is OFF (not in TALK mode).
2. Press the MEMORY/conference button.
3. Press the desired memory location button (0-9), or use the CID/VOL
(or) button to scroll to the desired telephone number.
4. Press the TALK/call back button. The stored telephone number
dials automatically.
Base:
Press the SPEAKER/CALL BACK button, or lift the corded handset.
1. Press the MEM/CONFERENCE button.
2. Press the desired memory location (0-9). The number
dials automatically.
-Or-
1. Make sure the phone is
OFF (not in talk mode).
2. Press the MEM/CONFERENCE button.
3. Press the desired memory location button (0-9), or use the REVIEW or
NEXT button to scroll to the desired telephone number.
4. Press the SPEAKER/CALL BACK button. The number dials automatically.
Chain Dialing from Memory
Use this feature to make calls that require a sequence of numbers, such as
a frequently used long distance card number. The following example shows
how you can store each part of the long dialing sequence and use chain
dialing to make a call through a long distance service provider:
The Number For Memory Location
Long Distance Access Number 7
Authorization Code 8
Frequently called long distance number 9