GE 29586 - Telephone Setup and Customization; Basic Settings (Rings, Message Length, Quality)

15
Telephone Set Up
You can customize the following settings to suit your needs.
Rings to Answer Selects the number of rings befor
e
the unit answers.
Message Length S
ets the length of time allowed for
incoming messages.
Recording Sets the recording quality between
Quality
standard (STD) and long play (LONG).
R
emote Access Set your 3-digit code used for remote
access to the unit.
Display Contrast Selects the display contrast
.
Local Area Code Sets y
our local area code for Dial Back.
TONE/PULSE Sets the phone for tone or pulse dialing.
Dialing
Set Day Sets the day.
Time/Date Sets the time and date.
Language Selects English, Fr
ench or Spanish.
Setting the Rings to Answer
This setting allows you to set the number of rings before the unit answers a call. You
can choose from 2-8 or Toll Saver (see “Toll Saver.”)
1. Press and release the MENU button. The screen displays RING TO ANSWER. The
unit announces, Setup Menu. Use SKIP to change setting. Press MENU to save
a setting.
2.
Use SKIP or REPEAT for the desired setting (2-8, Toll Saver).
3.
When nished, press MENU to conrm.
NOTE: To skip to the next setting, press MENU. To exit setup, press
EXIT.
Default Settings
Rings to Answer 4
Message Length 1 minute
Recording Quality Standard
Security Code 1 2 3
Display Contrast 3
Local Area Code – – –
Dialing Tone
Day Sunday
Time/Date 12 a.m. 1/01
Language English