GE 29586 - Managing Memory Entries (Erasing, Copying, Reviewing)

28
Erasing a Stored Number
1. Press the STORE button.
2. Press the memory location (0-9, A, B, C) to be erased.
3. Press the DELETE button.
Copying Caller ID Memories to User Memory
1. Press the VOL (+ or -) buttons to view the caller number and name you
want to copy.
2. Press the DIAL button to change the format (11 or 10 or 7 digits number format) as
desired.
3. Press the STORE button.
4. Press the memory location (0-9, A, B, C). The number ashes if there is a number
already stored in the memory location.
5. Press the STORE button to enter the edit mode, and then press the STORE button
again to edit the name.
NOTE: You may select a different memory location by pressing
SKIP or REPEAT (< or >) to scroll through the memories or press a
number key (0-9, A, B, C).
6. Press the STORE button to conrm and save, and wait for three seconds to exit.
NOTE: If the name you want to enter is longer than 12 characters,
only the rst 12 characters will be copied into memory.