27
Dialing a Quick Dial Number
1. Pick up the handset or press SPEAKER.
2. Press A, B, or C. The number dials automatically.
IMPORTANT: If you make test calls to emergency numbers, remain
on the line and explain the reason for the call. Also, make these
calls in off-peak hours, such as early morning or late evening.
Alternatively, you can preview the number before dialing (when the handset is
on-hook).
Press a Quick Dial button (A, B or C), the number will be shown on the display, press
DIAL again to make the connection in speakerphone mode.
Reviewing Stored Numbers
1. Press DIAL/ENTER. MEMORY DIAL=? is displayed.
2. Use NEXT or REVIEW to scroll through the memory locations.
• To dial the displayed number, press DIAL. The speakerphone comes on and dials
the number automatically. (To cancel, press SPEAKER).
• To exit stored number review, press FLASH/EXIT.
• To change the displayed number, press STORE.
EDIT TEL. NO. is displayed. See “Storing a Number in Memory.”
NOTE: Direct access memory A, B and C are displayed as Memory
11, 12 and 13 respectively on the display.
To Next Page
Loading...
