GE 5100 Series User Manual

COOL— For cooling
HEAT— For heating
FAN— For fan-only operation
The fan control sets the fan operation for
HIGH,
LOW
or AUTO speed. When set at AUTO , it auto-
matically switches between
LOW and HIGH as
room temperature changes.
The temp control is used to maintain the
room temperature. The compressor will cycle
on and off to keep the room at the same level
of comfort.
COOLER— For cooler temperatures
WARMER— For warmer temperatures
STOP/ON —Stops heating, cooling and fan opera-
tion. Power remains connected to the Zoneline
and the Freeze Sentinel still functions.
The
CALL SVC (call service) indicator will light
if the compressor fails to start. If the control is
set at
COOL , the compressor stops and the fan
operates alone. If set at
HEAT , it continues in the
HEAT setting. Call for service as soon as possible.
4
Operating Instructions
The
controls
on your
Zoneline
2
2
1
Mode Control Temp Control
1
MODE
TEMP
FAN
COOL FAN HEAT
COOLER WARMER
HIGH LOW AUTO
STOP/ON
CALL
SVC

GE 5100 Series Specifications

General

Brand	GE
Model	5100 Series
Category	Heat Pump
Language	English