EN
4
Operating the Radio
Tuning the Stations
1. Press ON/OFF (located on the top of the
radio) to turn on the radio.
2. Slide the FM/AM switch to the desired
broadcast band.
3. Turn TUNING to select a station.
4. Press ON/OFF to turn off the radio
Built-In AFC
The Built In Automatic Frequency Control
(AFC) works only on FM. It helps reducing
drift on FM reception and keeping the
radio locked in on the FM station to which
it is tuned.
When tuning in FM stations, you may no-
tice that the station you are tuning can
be well-tuned on two or three nearby
points on the dial. Always tune carefully
at the loudest and clearest point.
Antennas
AM Antenna-A built-in ferrite rod antenna
eliminates the need for an outside an-
tenna for AM reception. Rotating the unit
slightly may improve reception of distant
AM stations.
7-4894 EN-US 1/6/03, 8:33 AM5
To Next Page
Loading...