74 75
3. Use the Left/Right navigation buttons to
specify the idle period before automatic
power-o. The level bars correspond to the
following idle periods.
• LCD o:
30 seconds, 1 minute, 2 minutes, and
Always on.
• Camera o:
3 minutes, 5 minutes, 10 minutes, and
Always on.
4. Press the button to conrm.
Date/Time
See “Setting the Date and Time“ section
on page 25.
World time
The world time setting is a useful function on
your overseas trips. This feature enables you
to display the local time on the LCD screen
while you are overseas.
1. Select the World time setting from the
Setup menu as described previously. The
world time screen appears.
2. Use the Up/Down navigation buttons to
switch between the hometown ( ) and
travel destination ( ) elds.
3. Use the Left/Right navigation buttons to
select a city close to the desired time zone.
Then press the button to conrm.
To Next Page
Loading...
