File Numbering
After capturing photos or videos, the camera
will automatically save the le with a numeric
sux.
Language
See “Setting the Language“ section on
page 26.
Video system
Use this setting to determine your video
system in the current area.
1. Select the Video system setting from
the Setup menu as described previously.
2. Use the Up/Down navigation buttons to
select NTSC or PAL. Then press the
button to conrm.
The video output signal can be switched
to NTSC or PAL to accommodate dierent
regional standards. The appropriate setting
will vary between regions.
Select this
setting:
Serial number is derived and
assigned to a new le as follows:
Continue
whether the number should
continue on from the last photo
you have taken
Reset reset the counter to 1 and
save les in a new folder in the
memory card.
To Next Page
Loading...
Need help?
General
