Installation
Read these instructions completely and carefully.
Instructions
Power cord may include a current interrupter device,
A test and reset button is provided on the plug case,
The device should be tested on a periodic basis by first
pressing the TESTbutton and then the RESETbutton.
If the TESTbutton does not trip or if the RESETbutton
will not stay engaged, discontinue use of the air
conditioner and contact a qualified service technician.
TOOLS YOU MAY NEED
Phillips-head
screwdriver
Drill
Pencil
Adjustable Wrench
Ruler or Tape Measure
Level
Scissors or knife
Hand or Saber Saw
GE KIT NUMBERS
USE GE
KIT NUMBER: DESCRIPTION:
RAB46A ,46, Standard wall case for "J" model chassis. RAG13 stamped
47A, 47, 48A, aluminum exterior grille included. Remove the existing case
48B & 48 and replace.
RAK65A1 Kit for window installation.
RAK690
RAG13
RAG14E
FOR:
Use these kits for all GE
models and other brands
not listed
All GE Models
RAB36, 37, 38, 46, 47 or 48
(J-Chassis)
RAB36, 37, 38, 46, 47 or 48
(J-Chassis)
RAB36, 37, 38, 46, 47 or 48
(J-Chassis)
If you attach a custom architectural outdoor grille, use this kit
to ensure _er airflow.
Standard aluminum exterior grille (included with RAB46, 47, 48,
RAB46A, 47A, 48A, and 48B wall cases).
Architectural Iouvered exterior grille.
13
To Next Page
Loading...
