GE AKD-8 - Page 10

Remote Racking Operator for AKR Breakers
10
Section 4. Modifications
4-1 Converting Large Frame Breaker to work with Remote Racking Operator
Figure 6
Connecting Bracket – Align 1
st
to
existing holes in breaker frame.
¼-20 Bolt, Nut, Lock Washer, Flat Washer – Add
¼ inch hardware to existing hole of bracket
and frame in upper position as shown.
3/8-16 Bolt, Nut, Lock Washer, Flat Washer –
Add 3/8 inch hardware to existing hole in
bracket and breaker frame in lower position
as shown.
Racking Stop – Align racking
stop with existing hole in
breaker frame as shown.
3/8-16 Bolt – Add 3/8 inch
hardware from inside frame of
breaker as shown.
AKR751008EGBRMOD
& AKR125EGBRMOD
Modification Kit for AKD-8
AKR 75/100 & 125 Large
Frame Breakers