GE AKD-8 - Door Drilling Template for AKR 30;50 Doors

Remote Racking Operator for AKR Breakers
13
1. Place the bottom flange of the template
above the bottom edge of the door cutout. Both
p
ress studs will be on the inside of the cutout.
3. Drill (1) 0.251”
diameter hole
throu
g
h the door.
2. Drill (1) 1.75”
diameter hole
through the door.
Figure 8
Door drilling template for AKR 30/50 doors.
Existing AKR 30/50 breaker door.