LoadiNg and using the !/_asher. Always followfabric manufacturer's care label when laundering.
SortingWashLoads
Colors Soil Fabric Lint
Whites Heavy Delicates Lint Producers
Lights Normal EasyCare Lint Collectors
Darks Light Sturdy Cottons
ProperUseof Detergent
Add detergent and start the washer before adding
clothes so that the detergent can work effectively.
Using mo little or mo much detergent is a common
cause oflaund U problems.
You can use less detergent if you hmTesoft water, a
smaller load, or a lightly soiled load.
Loadingthe Washer
Load dD, items loosely, no higher than the top
row of holes in the washer rob. When loading wet
items make sure you set the load/water level high
enough to allow the items to move fl'eely. Water
level should just cover the clothes. To add items
after washer has started, push in Cycle Dial and
submerge additional items next to the agitator.
Close the lid and pull Cycle Dial out to restart.
• Do not wrap large items like sheets around the
agitator.
• Do not wash fabrics containing flammable
materials (waxes, cleaning fluids, etc.).
• Agitation will not start with the lid up.
9
To Next Page
Loading...
