3-78 UR FAMILY – COMMUNICATIONS GUIDE
MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) CHAPTER 3: IEC 61850 COMMUNICATION
3
3.5.2.44 Neutral instantaneous overcurrent (NeuIoc)
This element is instantiated in the following products: B30, C60, C70, D30, D60, F35, F60, G30, G60, L30, L60, L90, M60, N60,
T60.
Table 3-74: Neutral instantaneous overcurrent data objects
3.5.2.45 Neutral overvoltage (NeuOv)
This element is instantiated in the following products: B30, C60, C70, D30, D60, F35, F60, G30, G60, L30, L60, L90, M60, T60.
Table 3-75: Neutral overvoltage data objects
3.5.2.46 Neutral time overcurrent (NeuToc)
This element is instantiated in the following products: B30, C60, C70, D30, D60, F35, F60, G30, G60, L30, L60, L90, M60, N60,
T60.
Table 3-76: Neutral time overcurrent data objects
LNName: NeuIocPIOC# LDevice inst: Prot UR element: Neutral Instantaneous Overcurrent element #
data obj. data attribute Type FC UR Name Description R/W/C
Str ACD NEUTRAL IOC# PKP operand, which
indicates Op will operate when delay
expires.
R
general BOOLEAN ST NEUTRAL IOC# PKP R
dirGeneral ENUMERATED ST 0, the code for unknown. R
Op ACT NEUTRAL IOC# OP operand R
general BOOLEAN ST NEUTRAL IOC# OP R
Dpo SPS NEUTRAL IOC# DPO operand R
stVal BOOLEAN ST NEUTRAL IOC# DPO R
BlkRefγ1 ORG NEUTRAL IOC# BLOCK setting in setting
group γ.
R
setSrcRef ObjectReference SP NEUTRAL IOC# BLOCK. reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: NeuOvPTOV# LDevice inst: Prot UR element: Neutral Overvoltage element # functions
data obj. data attribute Type FC UR Name Description R/W/C
Str ACD NEUTRAL OV# PKP operands R
general BOOLEAN ST NEUTRAL OV# PKP R
dirGeneral ENUMERATED ST 0, the code for unknown. It is unknown as
the element is non-directional
R
Op ACT NEUTRAL OV# OP operand R
general BOOLEAN ST NEUTRAL OV# OP R
Dpo SPS NEUTRAL OV# DPO operand, which is the
inverse of NEUTRAL OV PKP
R
stVal BOOLEAN ST NETRAL OV# DPO R
BlkRefγ ORG NEUTRAL OV# BLK setting for setting
group γ.
R
setSrcRef ObjectReference SP NEUTRAL OV# BLK for group γ. reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: NeuTocPTOC# LDevice inst: Prot UR element: Neutral Time Overcurrent element #
data obj. data attribute Type FC UR Name Description R/W/C
Str ACD NEUTRAL TOC# PKP operand, which
indicates that Op operates when delay
expires
R
general BOOLEAN ST NEUTRAL TOC# PKP R
dirGeneral ENUMERATED ST 0, the code for unknown R
Op ACT NEUTRAL TOC# OP operand R