CHAPTER 3: IEC 61850 COMMUNICATION MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
UR FAMILY – COMMUNICATIONS GUIDE 3-169
3
3.5.4.14 Latched outputs (FLOut)
This element is instantiated in all UR products (B30, B90, C30, C60, C70, D30, D60, F35, F60, G30, G60, L30, L60, L90, M60,
N60, T35, T60).
Table 3-187: Latched output data objects
3.5.4.15 Shared inputs (FShIn)
This element is instantiated in all UR products (B30, B90, C30, C60, C70, D30, D60, F35, F60, G30, G60, L30, L60, L90, M60,
N60, T35, T60).
Table 3-188: Shared input data objects
stepSize AnalogueValue CF R
stepSize.f FLOAT32 0.001 R
DbMinΘ ASG Minimum Value in deadband calculationsR
setMag AnalogueValue SP R
setMag.f FLOAT32 “Minimum Value” of TDRΘ R/C
minVal AnalogueValue CF R
minVal.f FLOAT32 –9999.999 R
maxVal AnalogueValue CF R
maxVal.f FLOAT32 9999.999 R
stepSize AnalogueValue CF R
stepSize.f FLOAT32 0.001 R
LNName: FLOutGGIO1 LDevice inst: System UR element: Field Latching Outputs
data obj. data attribute Type FC UR Name Description R/W/C
Ind1Θ SPS FLO Θ Opened operand value R
stVal BOOLEAN ST FLO Θ Opened R
Ind2Θ SPS FLO Θ Closed operand value R
stVal BOOLEAN ST FLO Θ Closed R
Ind3Θ SPS FLO Θ OpnDOn operand value R
stVal BOOLEAN ST FLO Θ OpnDOn R
Ind4Θ SPS FLO Θ ClsDOn operand value R
stVal BOOLEAN ST FLO Θ ClsDOn R
InRef1Θ ORG FLO Θ Open setting. R
setSrcRef ObjectReference SP Open setting of FLO Θ reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef2Θ ORG FLO Θ Close setting. R
setSrcRef ObjectReference SP Close setting of FLO Θ reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: FShInGGIO1 LDevice inst: System UR element: Field Shared Inputs
data obj. data attribute Type FC UR Name Description R/W/C
IndΘ SPS SI Θ On operand value R
stVal BOOLEAN ST SI Θ On R
LNName: FTDRsGGIO1 LDevice inst: System UR element: Field Transducers
data obj. data attribute Type FC UR Name Description R/W/C
To Next Page
Loading...
