GE b30 Communications Guide

A-2 UR FAMILY – COMMUNICATIONS GUIDE
REVISION HISTORY APPENDIX A: MISCELLANEOUS
A
Table A-4: Major changes for version AE3 (English)
Table A-5: Major changes for version AE1 (English)
Table A-6: Major changes for version AC1 (English)
--- Update Phase Time Overcurrent number from 4 to 6 for C60, 3 to 6 for C70, 4 to 6 for F60, 2 to 4 for L30 and L60, and 4 to 6 for
L90 and M60 in features per product table, Modbus memory map
--- Updated (Disconnect) Breaker Switch number for 16 to 24 for C60 in features per product table, Modbus memory map
1-4 Updated features per product table, specifically updated Contact Inputs from 96 to 120 and Contact Outputs from 64 to 72,
as well as Breaker Restrike numbers
2- Updated Modbus memory map and F codes, including addition of PEAP-GTC and PAP protocols for user logins when using a
RADIUS server
2-9 Added information on the four time code fields added under the IEEE 2013 COMTRADE standard, in the Reading Oscillography
Files section
3- Updated IEC 61850 Communications chapter, including several IMD tables
Page Change
--- Deleted Pilot POTT for D60, L90 from Features per Product table, Modbus memory map
2-9 Added information on the four time code fields added under the IEEE 2013 COMTRADE standard, in the Reading Oscillography
Files section
3- Updated IEC 61850 Communications chapter, including several IMD tables
Page Change
2- Updated Modbus memory map
3- Updated IEC 61850 Communications chapter
Page Change
--- Rebranded from GE Digital Energy to GE Grid Solutions
1- Updated Features per Product table
2- Updated Modbus memory map and F codes
3- Updated IEC 61850 Communications chapter
Page Change

GE b30 Specifications

General

Model	b30
Manufacturer	GE
Coil Voltage	N/A (Solid State Relay)
Coil Power	N/A (Solid State Relay)
Mechanical Life	N/A (Solid State Relay)
Electrical Life	N/A (Solid State Relay)