GE Bently Nevada 1900/27 - The Display Mode Switch

Section 3 - Monitor Operation
23
3.1.2 The Display Mode Switch
Setpoint levels can be shown on the display by using the three-position Display
Mode switch. The positions of the Display Mode switch are Normal, Alert, and
Danger. Table 3.1 shows the effects of the Display Mode on the LCD.
Table 3.1: Display Mode Switch
SWITCH SETTING DISPLAY DESCRIPTION
The LCD displays
overall vibration in
units of in/s.
The LCD displays the
Alert Setpoint in
units of in/s.
The LCD displays the
Danger Setpoint in
units of in/s.