Need help?Do you have a question about the GE Bently Nevada 86517 and is the answer not in the manual?
Statement about product disposal responsibilities for non-EU customers.
Functional block diagram and main functions of the interface module.
Description of the extension cable's purpose, construction, and low-noise properties.
Details on accelerometer type, sensitivity, and mounting requirements for the system.
Procedures for receiving, inspecting, handling, and storing the equipment safely.
Instructions for mounting the interface module and connecting system components.
Guidelines for connecting the interface module to the monitor and associated wiring.
Procedure for calibrating the acceleration output and verifying the velocity signal path.
Procedure to measure common mode rejection for noise floor verification.
Steps to interpret fault indications and isolate issues in the transducer system.
Option to select charge sensitivity (50 pC/g or 100 pC/g) for the accelerometer.
Option to select filter corner frequencies for the interface module.
Option for setting the DC signal bias voltage on the interface module.
Option for agency approvals, crucial for hazardous area installations.
Sets the charge sensitivity of the charge amplifier at 50 pC/g or 100 pC/g.
Determines filter corner frequencies; cannot be changed without component replacement.
Sets the DC bias voltage to -10 Vdc.
Certification for hazardous areas; requires safety barriers for Class I, Division 1 or Zone 1.
Specifications for power, input characteristics, and acceleration output.
Specifications for velocity output, filters, environmental, and mechanical properties.
Specifications for softline and hardline extension cables, including connectors and temperatures.
Specifications for the Bently Nevada 50 pC/g accelerometer, including sensitivity and mounting.
General| Part Number | 86517 |
|---|---|
| Power Supply | 24 VDC |
| Series | Bently Nevada |
| Communication Interface | Ethernet |
| Operating Temperature | -20°C to +60°C |
To Next Page
