EasyManua.ls Logo

GE VersaMax IC200CPUE05 User Manual

GE VersaMax IC200CPUE05
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Important Product Information VersaMax*
IC200CPUE05
GFK-1892TW CPU with Embedded Ethernet Interface
December 2016
IP ADDRESS
RS485
PORT 2
RS232
PORT 1
CPUE05
FAULT
RUN
PWR
OK
IC200CPUE05
FORCE
PORT 1
PORT 1
LAN
STAT
ETHERNET
10 MBPS BASE T
ETHERNET
RESTART
MAC XXXXXXXXXXXX
IC200CPUE05 shares the basic features of the other VersaMax
*
PLC CPUs. It provides powerful PLC functionality in a small,
versatile system. CPUE05 can serve as the system controller for up
to 64 modules with up to 2048 I/O points. Two serial ports provide
RS-232 and RS-485 interfaces for serial communications. CPUE05
also provides a built-in Ethernet Interface. The RS-232 serial port
can be configured for Local Station manager operation to provide
access to diagnostic information about the Ethernet interface.
CPUE05 has 128KB of configurable memory.
In addition, CPUE05 is compatible with the EZ Program Store
device, which can be used to write, read, update, and verify
programs, configuration, and reference table data without a
programmer or programming software.
Features
Supports up to 64 modules with up to 2048 I/O
points
Can be either auto-configured or configured
from a programmer using configuration software
128KB of configurable memory for the
application program, hardware configuration,
registers (%R), analog inputs (%AI), and analog
outputs (%AQ)
Programming in Ladder Diagram and
Instruction List
Non-volatile flash memory for program storage
Battery backup for program, data, and time of
day clock
Super capacitor provides power to memory for
1 hour
- Over 1 hour, backup battery protects memory
contents up to 6 months.
- Backup battery has shelf life of 5 years when
not in use.
Run/Stop switch
Floating point (real) data functions
Embedded RS-232, RS-485, and Ethernet
communications
70mm height when mounted on DIN rail with
power supply (sold separately)
Product Information
Revision
IC200CPUE05-LT
Power Supply
Requires PWRx02
Firmware
Version 3.10
Programmer
Compatibility
VersaPro software version 2.0 or later and
Machine Edition Logic Developer.
Expansion I/O
Compatibility
All types of I/O and communications modules can
be used in expansion racks. Some analog
modules require specific module revisions in
expansion racks, as listed below:
Module Module Revision
ALG320 B or later
ALG321 B or later
ALG322 B or later
ALG430 C or later
ALG431 C or later
ALG432 B or later
*
Indicates a trademark of General Electric Company and/or its subsidiaries. All other trademarks are the property of their respective
owners.
© 2001-2016 General Electric Company. All Rights Reserved.
Question and Answer IconNeed help?

Do you have a question about the GE VersaMax IC200CPUE05 and is the answer not in the manual?

GE VersaMax IC200CPUE05 Specifications

General IconGeneral
BrandGE
ModelVersaMax IC200CPUE05
CategoryRecording Equipment
LanguageEnglish

Summary

Installation in Hazardous Areas

ATEX Zone 2 Installation Requirements

Requirements for mounting the module in an enclosure for ATEX Zone 2 environments.

Quick Start Guide

Pre-Installation Checks

Essential steps to inspect equipment and prepare for installation.

Module Installation Procedure

Instructions for mounting the CPU module on a DIN rail and connecting carriers.

PLC Operating Mode Control

Module LED Indicators

Port 1 Pin Assignments and Specifications

Ethernet Port Capabilities

Release Information and Upgrades

Firmware Upgrade Procedures

Details on upgrading firmware, compatibility, and upgrade kit availability.

Resolved Issues in This Release

List of problems and bugs fixed in the current product release.

Functional Compatibility Requirements

Information on required software versions and hardware compatibility for this release.

Product Restrictions and Open Issues

Related product manuals