To Next PageTo Next Page
Need help?Do you have a question about the GE WIU-2 and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | WIU-2 |
| Category | Recording Equipment |
| Language | English |
Product may cause radio interference in domestic environments, requiring adequate measures.
Circuit board components are vulnerable to ESD; dissipate body charge before handling.
Details the 10-pin connector J1 used for reader interface, listing pins for door ground, door input, REX, Wiegand data, and LED control.
Details the 7-pin connector J2 for controller interface, listing pins for power, ground, door DO/LED, data, and strike connections.
The 2-pin connector J3 is for 2-state reporting; default is jumpered to enable, remove jumper to disable.
The 2-pin connector J5 is reserved for future use or specific applications.
The 2-pin connector J6 enables HID reader supervision; place a jumper to enable, default is disabled.
Details UL listed installations, including operating temperature and humidity requirements.
