About Hot Water. GEAppliances.com
To Use Hot Water Dispenser
• Press HOTWATER button.
• Select desired water temperature on the LCDscreen (90, 150,
170, 185, or Custom).
• When hot water is ready (indicated on the screen and by a
beeping sound) hold container with left hand centered in the
recess under the spout,
• To dispense water, rotate the hot water knob counterclockwise
and then push it in, The knob must be held in during dispense,
Important Facts about HOTWATEl?
• _ Scalding Hazard.
Thewater coming from the dispenseris very hot and can cause
scaldsor burns.Read all warnings prior to use.(Seepage 4.)
• Alwaysusea container that issuitable for hot liquids (ceramic,
styrofoam, etc.)
• Themaximum singlehot water dispenseamount is 10 oz.
Additional hotwater can be dispensedby restartingthe hot
water feature through the LCDscreen.
• HOTWATERworks bestwith householdwater pressureof40 to
1O0psi.
• HOTWATERwill time out if unusedand may require a short
reheattime.
11