Installation Instructions
DIMENSIONS All measurements are given with leveling leg full}/retracted.
CYE Only CFE Only
......... 35%" _......... 35%"
69
697/8"
Doors
23 X" (}FE
X" CYE
Height from
floor to hinge
cover top 69 7/8"
Additional Dimensions
31¼" 36X"
CFE CYE
Overall Height to Top of 697A'' 697A''
Hinge Cover
Height to Top of Cabinet 69" 69"
Case Depth without Doors 29%" 24%
Overall Exterior Case Width 35_" 35%"
Overall Exterior Depth 36X" 31X"
Doors/Drawers with Handles
MOVING THEREFRIGERATOR
• Using the chart below determine if the width of your passageway can accommodate the depth of the refrigerator.
Ensureyou have clearance to prevent damage to the refrigerator before safety moving it to the final location.
• tf passageways are large enough to accommodate the refrigerator without removing the handles skip to Step 6. Leave
tape, film and all packaging on doors until the refrigerator is in the final location.
NOTE:Usea padded hand truck or moving straps to move this refrigerator. Place the refrigerator on the hand truck
with a side against the truck. We strongly recommend that two people move and complete this installation.
If your model number starts with CFE
Fully
Assembled
36.25"
Removing Removing Casew/ Case only
35.25" 33.75" 30.25" 2&375"
)
Remove door parts In order untildimenslon is less than openlng
If your model number starts with eYE
Fully Removing Removing C¢_ew/ C.aseonly
Assembled Handles 1.14Door FzSlides (no h|nges)
. 28.75" 25.25" 24.375"
)
22
To Next Page
Loading...
Need help?
General
