OPERATION CHECKLIST
A
Make sure all controls are left in the OFF
position. Check to be sure the cooktop is in the
UNLOCKED position (on models so equipped).
B
Make sure the flow of air to and from the
cooktop is unobstructed.
C
The serial plate for your cooktop is located on
the bottom of the burner box. In addition to the
model and serial numbers, it tells you the ratings
of the burners and the type of fuel and pressure
the cooktop was adjusted for when it left the
factory.
D
When ordering parts, always include the serial
number, model number and a code letter to
ensure proper replacement parts.
E
Recheck Steps:
Double check to make sure everything in this
guide has been completed. Rechecking steps
will ensure safe use of the cooktop.
11
Installation Instructions
To Next Page
Loading...
