GE CL 5

CL 5 Issue 01, 04/05 1-7
Whats in this Manual
General Information
 Adjust the instrument gain setting
 Specify the nominal material thickness
 Calibrate and zero the instrument/probe combination
 Set maximum and minimum alarm values
 Create and erase custom setup files
 Lock and unlock instrument controls
Chapter 4Measuring Thickness
 Specify and use the Normal measurement mode (No
A-Scan)
 Operate in Min-Scan and Max-Scan Measurement
mode
 Operate in Differential/Rate of Reduction
measurement mode
 Select and interpret the A-Scan plus Thickness
measurement mode (Optional)
 Magnify the displayed A-Scan using the Zoom
control
 Freeze the thickness reading and A-Scan
 Connect the digital caliper and measure acoustic
velocity (Optional)
Chapter 5Using the Optional Data Recorder
 Create, recall, and delete data recorder files
 Store A-Scan and thickness readings in data
recorder files
 Navigate data recorder file locations
 Attach notes to the data recorder file
 Print reports
Chapter 6I/O Technical Details
 Configure the instrument to communicate with PCs
and printers
 Thickness value format
 Remote control codes
CL 5 Issue 01, 04/05 1-7
Whats in this Manual
General Information
 Adjust the instrument gain setting
 Specify the nominal material thickness
 Calibrate and zero the instrument/probe combination
 Set maximum and minimum alarm values
 Create and erase custom setup files
 Lock and unlock instrument controls
Chapter 4Measuring Thickness
 Specify and use the Normal measurement mode (No
A-Scan)
 Operate in Min-Scan and Max-Scan Measurement
mode
 Operate in Differential/Rate of Reduction
measurement mode
 Select and interpret the A-Scan plus Thickness
measurement mode (Optional)
 Magnify the displayed A-Scan using the Zoom
control
 Freeze the thickness reading and A-Scan
 Connect the digital caliper and measure acoustic
velocity (Optional)
Chapter 5Using the Optional Data Recorder
 Create, recall, and delete data recorder files
 Store A-Scan and thickness readings in data
recorder files
 Navigate data recorder file locations
 Attach notes to the data recorder file
 Print reports
Chapter 6I/O Technical Details
 Configure the instrument to communicate with PCs
and printers
 Thickness value format
 Remote control codes