GE CL 5

5-4 Issue 01, 04/05 CL 5
5.2 Recalling and Erasing Stored
Data Recorder Files
Stored files can be recalled or erased at any time.
Once recalled, thickness measurements can be stored
in empty file locations, existing measurements can be
deleted and the advance direction can be changed. To
recall a Data Recorder file:
Step 1: Press
to access the CONFIGURATION
display, then set DATA RECORDER to ON.
Step 2: Press
again to launch the File Display
mode
Step 3: Activate the file selection function by pressing
below FILES. A file list will appear on the display.
Using the Optional Data Recorder Recalling and Erasing Stored Data Recorder Files
FIGURE 5-2Defining the Size and Advance Direction of a Data Recorder File
5-4 Issue 01, 04/05 CL 5
5.2 Recalling and Erasing Stored
Data Recorder Files
Stored files can be recalled or erased at any time.
Once recalled, thickness measurements can be stored
in empty file locations, existing measurements can be
deleted and the advance direction can be changed. To
recall a Data Recorder file:
Step 1: Press
to access the CONFIGURATION
display, then set DATA RECORDER to ON.
Step 2: Press
again to launch the File Display
mode
Step 3: Activate the file selection function by pressing
below FILES. A file list will appear on the display.
Using the Optional Data Recorder Recalling and Erasing Stored Data Recorder Files
FIGURE 5-2Defining the Size and Advance Direction of a Data Recorder File