GE CT ProSpeed Series

GE MEDICAL SYSTEMS CT PROSPEED SERIES INSTALLATION
2124011
iii
REV 0
NOTE
Applicable Products and Subsystem Designators
This Installation Manual is written for the CT products listed in the table below .
Almost the same Gantry (except DAS/Detector), X-ray Generator, and Table subsystem models are commonly
used for these products.
Subsystem models Operator Console, D AS/Detector , and PDU (P ower Distribution Unit) are not commonly used for
these products, as shown in the table.
Note also that the three different product models are named the same name ProSpeed."
In this manual, to refer to a correct subsystem, designators Qj T ype", 'S S T ype", ... , as written in the OC Designa Ć
tor", D AS/Detector Designator", and Model Number" columns are used.
PRODUCT NAME OPERATOR CONSOLE (OC) DAS/DETECTOR PDU
Operation
Display Device
CPU
Board
OC
Designator
Detector
Type
DAS/Detector
Designator
Model
Number
ProSpeed S Liquid Crystal
Display
CPW
Qj Type
Xe Gas
Xe Type
P9180AB/
P9180AF
ProSpeed SX
Lemage
ProSpeed
(See Note 1)
ProSpeed S Fast
ProSpeed SX Power
Lemage SX
Lemage SX/E
Qj-b Type
(See Note 2) 2121798
(See Note 2)
ProSpeed
Lemage Supreme
Solid-state
SS Type
ProSpeed VX
ProSeed Accell
ProSeed Accell EI
Plasma Display FMP1
Zj Type
Xe Gas
Xe Type
P9180AB/
P9180AF
ProSpeed
ProSeed
ProSpeed Plus
ProSeed EF
ProSpeed Advantage
ProSeed SA
CPW
Zj-a Type
Solid-state
S S T ype
2121798
(See Note 3)
Note 1 This ProSpeed is an upgraded model of ProSpeed S or ProSpeed SX (GEMS-AM and GAMS-A).
Note 2 ProSpeed, ProSpeed SX Power, or Lemage SX can have an S S T ype DAS/Detector by an option, otherwise,
these have an Xe Type DAS/Detector.
Note 3 In the case of Upgrade, P9180AB or P9180AF PDU will still be used instead of 2121798 PDU.
Zj/Zj-a
TYPE OC
Qj/Qj-b
TYPE OC
PDLCD
Xe TYPE SS TYPE
2121798
P9180AB/AF