GE CT ProSpeed Series

GE MEDICAL SYSTEMS CT PROSPEED SERIES INSTALLATION
2124011
3-19
REV 15
3–3 OPERATOR CONSOLE (Zj/Zj–a TYPE)
Note
This section applies to Zj Type or Zj–a Type OC.
For Qj–b Type OC, see Section 3–2, OPERATOR CONSOLE (Qj–b TYPE).
3–3–1 Operator Console (OC)
The Operator Console is installed as follows.
1. Move the OC to the Operator Console room using its own casters.
NOTICE
The OC contains a hard disk drive unit and other fragile equipment.
Take care when moving the OC unit.
Note
Position the OC so the operator can see the patient on the table from the console.
OPERATOR CONSOLE
ILLUSTRA TION 3–14