GE D20 - D20;D200 Power Supplies and Chargers

D20/D200 Technical Overview
GE Grid Solutions
64
PRPI-019-3.00-10 GE Information
D20AC Option Description
WESTERM D20ACL 6VT/3CT (517-0383) Termination panel for the D20AC, supporting six AC voltage inputs
and three AC current inputs, which connect through a barrier
terminal strip.
WESTERM D20ACL 6VT/6CT (517-0384) Termination panel for the D20AC, supporting six AC voltage inputs
and six AC current inputs, which connect through a barrier terminal
strip.
WESTERM D20ACL 6VT/9CT (517-0385) Termination panel for the D20AC, supporting three AC voltage
inputs and three AC current inputs, which connect through a barrier
terminal strip.
WESTERM D20AC 3VT/3CT (517-0370) Similar to the 517-0380; however, the unit does not support power
through the D.20 Link.
WESTERM D20AC 3VT/6CT (517-0371) Similar to the 517-0381; however, the unit does not support power
through the D.20 Link.
WESTERM D20AC 3VT/9CT (517-0372) Similar to the 517-0382; however, the unit does not support power
through the D.20 Link.
WESTERM D20AC 6VT/3CT (517-0373) Similar to the 517-0383; however, the unit does not support power
through the D.20 Link.
WESTERM D20AC 6VT/6CT (517-0374) Similar to the 517-0384; however, the unit does not support power
through the D.20 Link.
WESTERM D20AC 6VT/9CT (517-0375) Similar to the 517-0385; however, the unit does not support power
through the D.20 Link.
2.5 D20/D200 Power Supplies and Chargers
D20 power supplies are switch-mode converters that provide output power for the D20 main
processor, VME cards, modems and D20 peripheral I/O modules, as required. The power
supplies are designed to accept standard voltage inputs and meet the power requirements of the
D20/D200.
These power supply modules mount vertically in the D20/D200 chassis, as shown in Figure 36
and Figure 37.
Figure 36 D20 Power Supply