GE D20 - CE Mark Compliance Information; Overview of CE Mark Compliance

GE Grid Solutions
D20/D200 Technical Overview
GE Information
PRPI-019-3.00-10
1
About this Document
Purpose
This document provides a technical overview of the D20/D200 Remote Terminal Unit (RTU).
The document is organized as follows:
• What’s New: This section highlights recent additions and enhancements that have been
made to the D20/D200 product line.
• 1. System Overview: This section provides an overview of the D20/D200 system hardware
and software.
• 2. Detailed Technical Description: This section provides a detailed description of the
D20/D200 hardware, software and operation.
• 3. Configuration and Maintenance Software: This section describes utilities and
applications that are available to help you configure, manage and maintain your D20/D200
system.
• 4. Application Software: This section describes some of the substation automation and
SCADA applications that are available for the D20/D200.
• 5. Frequently Asked Questions: This appendix presents answers to frequently asked
questions about the D20/D200.
• A. Specifications and Supported Standards: This appendix lists key industry
specifications with which the D20/D200 complies.
• B. Supported Host Protocols: This appendix lists SCADA host protocols supported by the
D20/D200.
• C. Supported IED Protocols: This appendix lists IED protocols supported by the
D20/D200.
• D. Power Consumption – D20 Modules This appendix lists nominal power consumption
for D20 components, for use in power calculations.
• E. D20/D200 Main Processor Compatibility: This appendix shows the compatibility of
D20 processors with the D20/D200 chassis.
• F. D.20 Link Installation: This appendix provides guidelines on planning and installing a
D.20 Link.