Electrical requirements.
Read these instructions completely and carefully.
ElectricalConnectionInformationforElectricDryers
A WARNING--To reduce the risk of fhe,
electric shock, or personal injury:
, DONOTUSEANEXTENSIONCORDWITHTHIS
APPLIANCE.
° THISAPPLIANCEMUST BEPROPERLYGROUNDED.
Electrical Requirements
• This duet must be connected to an indixidual
branch circuit, protected by the required time-
del Wfi_ses or circuit breakers. 208V or 24(W
installation 30 mnps.
Thisdryermustbeelectricallygroundedin accordance
withlocalcodesandordinances,orin theabsenceof
localcodes,inaccordancewith theNATIONAL
ELECTRICALCODE,ANSI/NFPANO.70.
• Use copper conductors only.
° If the electricsupplydoesnotmeet theabove
spedfications, call a licensed elecuician.
NOTE:Awiring diagram is located inside the
conuol panel.
ElectricalConnectionInformationfor GasDryers
WARNING--To reduce the risk of fire,
electric shock, or personal in jusT:
, DONOTUSEANEXTENSIONCORDORANADAPTER
PLUGWITH THISAPPLIANCE.
• DONOT,UNDERANY CIRCUMSTANCES,CUTOR
REMOVETHETHIRDGROUNDINGPRONGFROM
THEPOWERCORD.
Thisdryermustbeelectricallygroundedin accordance
withlocalcodesandordinances,orintheabsenceof
localcodes,inaccordancewiththeNATIONAL
ELECTRICALCODE,ANSI/NFPANO.70.
Electrical Requirements
• This &Ter nmst be supplied with 12(W, 60 Hz,
and connected to an indivkh_al properly
grounded brand dr(uit, protected by a 15 or
20 mnp circuit breaker or fime-del W fi_se.
• If the electric supply pr(Mded does not meet the
above specifications, it is recolnlnended that a
licensed electrician install an approved outlet.
ExternalGround(ifroquirod)
An externalgroundwire, (netprovided), whichmeets
localcodes,maybeaddedbyattachingit to thegreen
groundscrew ontherear ofthedryerintheupperleft
handcorner,andtogroundedmetalcoldwaterpipe or
otherestablishedground.
Attachgroundwire
(obtainlocally)
L-
tr.o
NOTE:Axdring diagram is located inside the
(ontrol panel.
Ensureproperground
existsbeforeuse
11
To Next Page
Loading...
