GE DSXH47GG - Dryer Specifications Table

7
QUICK REFERENCE SHEET
SPECIFICATION
Electrical
Volts 120/208 or 120/240
Amps (circuit)
Motor wattage
Heat input (Watts @ 208/240 VAC)
Heat input (BTU/Hr.)
Auto. Elec. Ignition
Drum
Size (Cu. Ft.)
Finish
R.P.M.
Airflow CFM
DRUM TEMPERATURES (Max.
opening on 1st cycle)
High
Medium
Medium/Low
Low
Dimension (Inches)
Height (Stack Models)
Width
Depth
Vent Capability**
Top Finish
Port Opening (Sq. In.)
ELECTRIC MODELS
120/208 or 120/240
30
160-350 Watts
3200/4500
---
---
5.7
Power Paint Epoxy
48 - 54
200
138° - 190°
134° - 180°
130° - 170°
120° - 165°
36”
27”
28.5”
4-Way
Power Paint Enamel
235
±
±
±
±
±
GAS MODELS
120
15
160-350 Watts
---
20,000
Yes
5.7
Power Paint Epoxy
48 - 54
200
145° - 190°
140° - 180°
130° - 170°
120° - 165°
36”
27”
28.5”
3-Way
Power Paint Enamel
235
** Electric dryers can be vented four ways: through back, bottom, right or left side.
** Gas dryers can be vented three ways: through back, bottom, or right side.