DuraStation™ EV Charger User Manual
20 GE Industrial Solutions ©2014 GE Company All Rights Reserved
3.4 GE WattStation Connect
GE WattStation Connect is a server application that allows owners to configure and monitor their EVSEs
remotely. GE WattStation Connect also handles RFID authentication and setup. The customer will access GE
WattStation Connect through their web browser on their PC
3.4.1 Status
GE WattStation Connect will provide EVSE status to customers. The customer will receive these
updates through their web browser, text message and/or email. Here is a list of status updates the
customer will receive:
• Algorithm Status
• History/Reporting
• Actual current draw by each group member
- Summary of current draw for the entire group
- Max current renegotiated
- Algorithm settings committed
- Algorithm enabled/disabled
- Internal EVSE temperature
• Monitoring
- EVSE state: disconnected, connected, charging and fault
- Internal EVSE temperature
• Control
- Scheduled charging
- Override of charging
- Charging delay
• Diagnostics
- Ground fault
- Loss communication
- RFID failure
- Un-authorized users
- Contactor monitor
- Overload
- Over/Under voltage
- Invalid payment
- Additional fault diagnostics
3.4.2 Firmware Updates
The firmware for GE’s EV charging stations that are connected to GE WattStation Connect may be
upgraded remotely by GE at any time to address critical bug fixes, security patches, or to add feature
upgrades.
To Next Page
Loading...
