DVSR xU User Manual 75
To setup a ShadowTour
1. In the PTZ menu go to the ShadowTour setup button and press Enter or left-click the mouse. The
Shadow Tour submenu appears. See Figure 52.
Figure 52: The PTZ Sequence submenu screen
2. Select the Record button and press Enter or left-click the mouse. The PTZ control appears on
screen.
Note: The PTZ camera used must be able to support a ShadowTour function.
3. When you are satisfied with the PTZ track, press Enter or left-click the mouse to save it and to
return to the Set Shadow Tour submenu.
4. Go to Test and press Enter or left-click the mouse. The PTZ track will be repeated until you select
Stop.
5. Go to Done and press Enter or left-click the mouse to return to the PTZ menu.
6. To copy settings to another external alarm input:
a. In the PTZ menu go to Copy to Camera. Select one of the outputs listed.
b. Go to Copy and press Enter or left-click the mouse.
To Next Page
