EasyManuals Logo

GE EGR2000 Owner's Manual

GE EGR2000
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
GEAppliances.com
Grate
Drippa_(if SOequipped)
surfaceburner
- CAUTiON:
Donotoperatethe cool<topwithout all
burnerparts,drip pans(ifso equipped)
andgrates in ptace.
Cleantheseholes thoroughlyon each
burner.
Standard Twin Burner Assemblies (on
Forcleaninginformation on sealedburners,
seesection below.Sealedburner cooktops
do not !iftup.
Onmodels with standard twin burners,
the cooktoplifts up for easg access.
Turn all controls OFFbefore removing burner
parts and drip pans(ifsoequipped).
The burner grates and drip pans (ifso
equipped)can be lifted off, making them
easy to clean.
The holesin the surface burners of your
range must be kept clean at all times for
proper ignition and an even, unhampered
flame.
Youshould clean the surface burners
routinely, especially after bad spillovers,
which could clog these holes.
Wipe off surface burners. If heavy spillover
occurs, remove the surface burnersfrom the
range. Burnerslift out for cleaning. Lift up the
cooktop and then lift out the surface burners.
To remove burned-on food, soakthe surface
burner in a solution of mild liquid detergent
and hot water.Soakthe surface burner for
20 to 30 minutes.
some models)
Formore stubborn stains,use a cleanser like
Soft Scrub®brand or BanAmP brand. Rinse
well to remove any traces of the cleanser
that might clog the surface burner openings.
Donot usesteel wool because itwill clogthe
surface burner openings and scratch the
surface burners. If the holes become clogged,
clean them with a sewing needleor twist-tie.
Beforeputting the surface burner back,
shake out excesswater and then dry it
thoroughly by setting it in a warm oven
for 30 minutes.Then place it back in the
range, making sureit is properly seated
and level.
Checkthe flame pattern of each burner.
Ifthe flames are 'jumpy" (notsteady),
clean the holes again with a sewing
needle or twist-tie.
Grate
Burnercad
Burner heaa
Drie
Sealed Burner Assemblies (onsomemodels
Turnall controls OFFbefore removing the
burner parts and drip pans (ifso equipped).
Theburner grates,caps,burner heads and
drip pans (ifso equipped)can be lifted off,
making them easy to clean.
CAUTION:oonot operate
the cooktop without a!!burner parts, drip pans
(ifso equipped) and grates in place.
NOTE:Donot lift the cooktop.Lifting the
cooktop on sealedburner models can leadto
damage and improper operation of the range.
/
Electrode_
The electrode of the spark igniter is
exposed when the burner head is
removed.When one burner isturned
to LIFE,all the burnersspark. Do not
attempt to disassemble or clean
around any burner while another
burner ison.An electric shock may
result,which could cause you to
knock over hot cookware.
27

Other manuals for GE EGR2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE EGR2000 and is the answer not in the manual?

GE EGR2000 Specifications

General IconGeneral
BrandGE
ModelEGR2000
CategoryRanges
LanguageEnglish

Related product manuals