GE Grid Solutions
G500 Substation Gateway,
Quick Start Guide
GE Information SWM0106-1.00-0
5
13. Configuration implemented in MCP Studio:
• Connections
• Client and Server Map files
• System Point Manager
• Alarms
• Calculator
• Data Logger (storage may need to be re-adjusted if the target G500 has different storage sizes)
• Load Shed
• Systemwide (storage may need to be re-adjusted if the target G500 has different storage sizes)
• Access (Local users, Automatic HMI login settings, VPN Client List)
• ARRM
• AI Text Enumeration
• Oneline Screens
• Analog Reports
• IEC61850 Client
• LogicLinx
Cyber security related Certificates are not included in snapshots, and therefore cannot be restored. All certificates must be
imported again after the snapshot restore. All secure connections using certificates must be re-associated with the new imported
certificates (e.g. Secure Connection Relay, VPN Server, etc.)
License file (key) is not restored with the snapshot.
G500 enrollment in Predix Edge Manager Cloud and associated settings are not restored with the snapshot.
Default Users
The G500 from the factory has two default users.
1. Default Root User – root (root has all permissions to the G500 but only available via the serial maintenance port or
Local KVM).
2. Default Administrator user – defadmin (restricted permissions - used for initial setup).
Note: There are no other default users on a from factory G500.
Default Root User - root
The G500 unit that comes from factory has below default root user credentials.
User Name: root
Password: geroot
The default root user is a super user in G500 which can access all the settings and files. The root user access is restricted via:
• Front serial maintenance port.
To Next Page
Loading...
