GE GFW510 User Manual (English)

Questions and Answers:

B
Brandon ReillyAug 23, 2025
How to fix GE GFW510 not draining, spinning, or tumbling?
- S
  Samantha GarciaAug 23, 2025
  If your GE Washer isn't draining, spinning, or tumbling, first, redistribute the clothes and run the Rinse & Spin cycle. If you're washing a small load with heavy and light items, increase the load size. Also, the pump filter might be clogged, so refer to the Care and Cleaning section for instructions on cleaning it. Ensure the drain hose is straight and not compressed by the washer. Check your household plumbing for clogs and call a plumber if needed. Finally, make sure there's an air gap between the drain hose and the drain to prevent siphoning.
J
Jeffrey MullenSep 1, 2025
GE Washer has no power, what to do?
- C
  Cassandra RodriguezSep 1, 2025
  If your GE Washer has no power or isn't working, first, ensure the power cord is securely plugged into a working outlet. Next, verify that both the hot and cold water faucets are fully turned on. Check your house circuit breakers or fuses and replace or reset them as needed, ensuring the washer has a separate outlet. Note that the first time the washer is plugged in, it performs automatic system checks, which may take up to 20 seconds before you can use it. This is normal.
V
Valerie ReeseAug 31, 2025
What to do if my GE GFW510 Washer has no power or is not working?
- E
  Erika VangAug 31, 2025
  If your GE washer has no power or isn't working, try these steps: * Make sure the power cord is securely plugged into a working outlet. * Ensure both hot and cold water faucets are fully turned on. * Check the house circuit breakers or fuses. Replace fuses or reset the breaker. The washer should have a separate outlet. * If it's the first time the washer is plugged in, automatic system checks occur, which may take up to 20 seconds. This is normal.
D
darnoldAug 30, 2025
Why is water not entering my GE Washer or entering slowly?
- A
  Alicia MyersAug 30, 2025
  If water isn't entering your GE washer or is entering slowly, the washer does several system checks after Start is pressed; water will flow a few seconds after pressing Start. Check if the water valve screens or inlet hose screen washers are stopped up; turn off the water source and clean the screens. Ensure fill hoses aren't kinked or clogged. Verify the water supply is turned on fully for both hot and cold faucets and that the faucets are completely open. The washer door must be closed for all cycle operations. Ensure the fill hoses connect the hot water supply to the hot inlet and the cold water supply to the cold inlet.
L
Leslie SmithAug 29, 2025
Why is my GE GFW510 making loud noises and vibrating?
- F
  Frank NelsonAug 29, 2025
  If your GE washer is making loud or unusual noises, vibrating, or shaking, it is designed to move slightly (about 1/4 inch). Ensure all rubber leveling legs are firmly touching the floor; adjust them if the washer is uneven and lock them in place. An unbalanced load can also cause this issue; pause the unit, open the door, and manually redistribute the load. To check the machine, run a rinse and spin cycle with no load; if it runs normally, the unbalance was caused by the load.
S
Stanley OwensAug 28, 2025
What to do if GE GFW510 has no power or is not working?
- S
  Sandra HarrisAug 29, 2025
  If your GE Washer has no power or isn't working, first, ensure the cord is securely plugged into a working outlet. Then, check that both hot and cold water faucets are fully turned on. Also, inspect your house's circuit breakers or fuses, replacing fuses or resetting the breaker as needed, ensuring the washer has a separate outlet. If it's the first time the washer is plugged in, automatic system checks occur, which may take up to 20 seconds before you can use the washer; this is normal.
J
juanmooreAug 27, 2025
Why is my GE Washer not draining, spinning, or tumbling?
- J
  Jason RoblesAug 27, 2025
  If your GE Washer is not draining, spinning, or tumbling, it could be due to several reasons. First, the load might be unbalanced; try redistributing the clothes and running a Rinse & Spin cycle. If you're washing a small load with heavy and light items, increase the load size. Also, the pump filter might be clogged; refer to the Care and Cleaning section for instructions on cleaning it. Ensure the drain hose isn't kinked or that the washer isn't sitting on it, and check your household plumbing for clogs, calling a plumber if necessary. Finally, make sure the drain hose isn't siphoning by ensuring there's an air gap between the hose and drain and that it's not inserted more than 7 inches into the drain pipe.
K
Katherine GrayAug 27, 2025
Why is my GE GFW510 improperly dispensing softener or bleach?
- B
  Brandi AriasAug 27, 2025
  If your GE Washer is improperly dispensing softener or bleach, clean the dispenser drawer monthly to remove buildup of chemicals. Also, make sure you are using the correct amount of softener and not filling it above the max line.
K
Kayla BakerAug 26, 2025
Why is there not enough water in my GE GFW510 Washer?
- L
  Lisa ColemanAug 26, 2025
  Horizontal washers, like your GE Washer, do not require the tub to fill with water like top-load washers. This is normal.
O
Olivia FrankAug 25, 2025
How to stop loud noise, vibration, or shaking in GE Washer?
- C
  Charles BrennanAug 25, 2025
  If your GE Washer is making loud or unusual noises, vibrating, or shaking, note that the washer is designed to move slightly (about 1/4 inch) to reduce forces on the floor, which is normal. Ensure all rubber leveling legs are firmly touching the floor; adjust them if the washer is uneven and lock them in place. An unbalanced load can also cause this; pause the unit, redistribute the load manually, and run a rinse and spin cycle without a load to check the machine. A clogged pump filter may also be the problem; refer to the Care and Cleaning section.

GE GFW510 Specifications

General

Brand	GE
Model	GFW510
Appliance Category	Washer
Washer Type	Front Load
Capacity	4.8 cu. ft.
Color	White
Steam Function	Yes
Number of Wash Cycles	12
Control Type	Electronic
Smart Washer	No
Spin Speed	1300 RPM
Water Temperature Settings	Cold, Warm, Hot
Energy Star Certified	Yes
Number of Temperature Settings	3
Number of Spin Speeds	5
Delay Start	Yes
Child Lock	Yes
WiFi Enabled	No
Width	27 inches
Depth	30.5 inches
Height	39 inches