Cleaning the Pump Filter
Due to the nature of the front-lo(]d washer,
it is sometimes possible for small (]rticles
to pass to the pump. The washer has a
filter to capture lost items so they (]re not
dumped to the dr(]in. To retrieve lost items,
cle(]n out the pump filter.
1. Using a small flathead screwdriver or
coin, open the access door.
2. Pl(]ce (] shallow p(]n or dish under
the pump (]ccess door and towels
on the floor in front of the washer to
protect the floor. It is normal to catch
(]bout (] cup of w(]ter when the filter
is removed.
3. Pull down the pour spout.
GEAppliances.com
Pump
f filter
o
5o
6.
Turn the pump filter counterclockwise
(]nd remove the filter slowly, controlling
the flow of the dr(]ining w(]ter.
Remove the filter (]nd cle(]n the debris
from the filter.
Repl(]ce the filter (]nd turn clockwise.
Tighten securely.
o
8.
Flip up the pour spout.
Close the (]ccess door by hooking the
bottom t(]bs first, then rot(]ting the
(]ccess door shut.
15
To Next Page
Loading...
