GE GL317D - Annexes; Tooling and accessories L60-028 EN03

Annexes
Toolin g an d accessories
GE Information08- 2016 L60- 028EN/03
1/8
Presentation
Introduction
Special tooling is necessary for :
 commissioning,
 maintenance of the circuit- breaker.
Only the tools and accessories specified on ordering are delivered. Commer-
cially available tools (e.g. : spanners, torque wrenches, spirit levels...) are not
supplied.
In this module
This module contains the following topics :
Topic Page
Special tools 2
Accessories 6