How to load your dishwasher
>~OLi
vh’ill
ll(ii’e.
Make
sure dishes
are
properly
loaded
to
insure that
water
can
reach
the
soiled surfaces, The wash
arm
in
the bottom sprays water up. The tower that rises in the
center sends water out
over
the dishes
to
wash the
items in the upper
rack.
A spray arm in the top washes
down. Make sure to place
tall
items to the outside so
the upper wash
arm
is not blocked.
WATCH OUT
[’OK
TH15..
The
wash
tower rises through the center of the bottom
rack
during
the
wash
and rinse portions of the cycle.
Don’t block
i[
or
load
tull
thillgs
next to it. Also, be
careful not to let
a
portion of
an
item such
as
a
pot or
dish handle
extend
through the bottom rack. This
could
block the wash
arm
and
cause poor washing results.
8
How to load the TOP
MCK
The top rack is best
for
glasses, cups
and
saucers. Cups
and glasses fit best
along
the sides. This is the place
for
dishwasher-safe plastics, too. Make sure small plastic
items are lodged in tightly so they
can’t
fall onto the
Calrod(’’heating
unit. Arrange stemware so that it cannot
move easily. Don’t let the glasses touch each other.
This rack is
ideal
for
dishwasher-safe plastics. When
loading, place plastic items along the back and be sure
that each plastic tumbler is secured over two fingers.
This will prevent dislodging; tumbler
will
not
fall
through rack onto heating unit.
—
To Next Page
Loading...
