GE GSD720 - How to Change Color Panels

How to change color panels
1~ you are redecorating, you can
Note: Other color panels are
change your dishwasher’s front
available for your dishwasher.
panels to match or blend with your
Check the color you want on the
new colors.
order form below and mail it to us.
The panels are held in place by the
Wood panel trim kit GPF 40
door trim
and the trim on the panel
contains trim and instructions
for
below the door. Each side of each
adding a decorative wood door
panel is a different color. Or you
can paint
a panel with the color of
your own choice.
panel;nd lower access panel to
match kitchen cabinets. Use the
order form below to order this kit.
Do not operate the dishwasher
while changing panels or when
lower access panel is removed.
How to change the door panel:
1. Take out three trim screws on
either side of the dishwasher door.
Remove the side trim.
2. Slide the door panel out.
(Careful—edges
may be sharp.)
3. Turn the door panel around and
put the color you want in front.
4. Replace the door panel, side
trim and screws.
How to change the lower panel:
1. Remove four panel attachment
screws. (Two above the panel, two
below the panel.)
2. Remove the entire panel.
3. Take out three screws and
remove the top trim.
4. Slide the door panel out.
5. Turn the panel around and put
the color you want in front.
6. Replace the lower panel, top
trim and screws.
7. Replace the entire panel and
four attachment
screws.
15
%
-----------------------------------------
--------------------------------- --------7
1
1
ORDER FORM
1
1
1
1
Use this form to order, without charge, your choice of ~
a color panel not supplied with your dishwasher or ~
1
a wood panel trim kit.
1
1
Please mark only one box.
1
1
[. I White/Almond ~ ~ Harves~lack ~
1
Door and Access Panel GPF 24
24 Door ~nd Access Panel
1
GPF 26
t
I 1 Kit GPF 40
1
1
1
Wood Panel Trim Ki(
1
?
c
FOLD HERE
—
Name:
Address;
City:
State:
Zip Code:
Model No.:
Serial No.:
Date Purchased: