GE GSLP1100 - Disconnecting the Washer

TO DISCONNECT THE WASHER:
14
Hose Connector
Water Flow
Button
Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL
GSLP1100—ONE-FAUCET CONNECTIONS (CONT.)
MAKE SURE THE TEMPERATURE
SELECTOR IS SET AT COLD/COLD
6
SLOWLY TURN ON THE WATER
FAUCET ALL THE WAY TO THE
DESIRED TEMPERATURE
SETTING
7
PLUG THE POWER CORD INTO A
3-PRONG GROUNDED OUTLET
8
Insure proper ground
exists before use
The electrical power cord is on the back of the
washer.
REMOVE THE PROTECTIVE FILM
COVERING THE CONTROL PANEL
9
TURN WATER FAUCET OFF
1
UNPLUG POWER CORD AND
RETURN IT TO THE STORAGE
AREA
2
PRESS THE RED WATER FLOW
BUTTON TO RELEASE THE
WATER PRESSURE
3