To Next PageTo Next Page
Need help?Do you have a question about the GE GTDP740EDWW and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | GTDP740EDWW |
| Appliance Category | Dryer |
| Fuel Type | Electric |
| Capacity | 7.4 cu. ft. |
| Number of Cycles | 12 |
| Timed Dry | Yes |
| Reverse Tumble | No |
| Control Type | Electronic |
| Color | White |
| Voltage | 240 V |
| Amperage | 30 A |
| Drum Material | Aluminized Alloy |
| Number of Temperature Settings | 4 |
| Wrinkle Care Option | Yes |
| Moisture Sensor | Yes |
| Energy Star Certified | No |
| Weight | 130 lbs |
| Dryer Cycle Selections | Delicate, Heavy Duty, Normal, Air Fluff |
| Width | 27 in |
| Height | 44 in |
General safety guidelines, including warnings and grounding instructions.
Explains the meaning of letters and numbers in dryer model designations.
Outlines what GE covers and what is not covered under warranty.
Diagrams showing electrical, gas, and venting connections for various models.
How to enter, navigate, and use diagnostic tests and error codes.
Specifies electrical needs and resistance/voltage values for components.
Diagnostic procedures for key electronic components on the main board.
Diagnostic steps for water valve, motor, and checking for board failure.
Guides for proper dryer installation, including connections, venting, placement, and leveling.
Step-by-step instructions for reversing the dryer door swing.
Overview of the control panel, drying cycles, settings, and special features.
Explains features like Energy Smart, Sensor Dry, and Clean Speak.
Steps for removing the backsplash and top cover panels.
Steps for removing the front panel and the dryer drum.
Locates internal parts and describes rear bulkhead removal.
Instructions for removing specific dryer components like blower, heaters, valves, and sensors.
Provides solutions for common dryer issues like not starting, heating, or noise.
